--- Overview ---

This is the documentation page for ContactGlove2.

Precautions for Use

Introduction

Before using ContactGlove2, please review the following precautions after unpacking it.

• When putting on or taking off the ContactGlove2, do not pull strongly on the fingertips, including the built-in sensors.

  • Handle ContactGlove2 with the same caution to avoid damage.
  • Pulling on the bending sensors embedded on the back of the fingertips may damage the sensors.
  • For instructions on how to put on or take off the gloves, please refer to the User Guide (opens new window).

• Be careful not to let the Velcro parts stick to the glove's inner fabric (palm-side fabric material), as this may cause fraying.

  • In case of damage, it will be excluded from warranty coverage.
  • Please also review the Precautions section.

Precautions

These are precautions related to the product warranty.

WARNING

If damage occurs due to the following actions, warranty coverage will not apply. Please be aware of this.

• ContactGlove2 Body
  • Dropping from a high place
  • Using in a humid environment / immersing in water / getting wet, etc.
  • Disassembling
  • Modifying
• ContactGlove2 Sensor
  • folding
• ContactGlove2 Glove
  • If the inner fabric sticks to the Velcro and frays when removing