Setup

Setting up DivingStation

To send information from ContactGlove to VMC via DivingStation, you need to complete the setup of DivingStation first. Please refer to the DivingStation setup guide (opens new window) for instructions.

Next, go to DivingStation's settings and make sure Enable Virtual Motion Capture Protocol is enabled.

Updating ContactGlove Firmware

To use this feature, you need to have Firmware version 1.3 or higher installed. You can check the installed Firmware version under "/Devices." Firmware updates can be performed from "/Devices/Advanced Settings."

Downloading Virtual Motion Capture

Download Virtual Motion Capture (opens new window) from the official website and run the EXE file. For instructions on how to use VMC, please refer to this guide (opens new window).

Setting up mocopi

Follow the official VMC setup procedure (opens new window) to configure mocopi. Ensure that VMC, running on your PC, is ready to receive mocopi data from the connected smartphone.