ContactGlove Document

# ContactSheet Details

# Package Contents

Item Description Quantity
ContactSheet ContactSheet main module L/R-1
ContactSheet Dongle Dedicated dongle for ContactSheet connection 1
USB-C Cables Cables for charging ContactSheet 2
ContactSheet Mounting Stickers Stickers for attaching ContactSheet to Quest2/3 controllers *12
Silicone Bands Bands for attaching ContactSheet to QuestPro controllers 4
Cleaning Paper For cleaning the surface of the controller 2
Controller Strap Third-party strap mentioned below 1

*The card included in the package may state 15, but the correct number is 12.

CS_packages

Note

Due to manufacturing reasons, accessories may be placed in the sponge pockets or at the bottom of the sponge.

If accessories are at the bottom of the sponge
CS_pakageopen

# Features

CS_panel

# Descriptions

  • Power Button

    • The power button is located at the back of the main unit. Long press for a few seconds to turn on the ContactSheet.
    • When performing a Firmware update via a wired connection, ensure the power is ON during connection.

  • Pairing Button

    • The button with an indentation located at the front of the main unit. Used for pairing.

  • Status Lamp

    CS_Light

    • The status lamp of ContactSheet is located on the front side (pairing button side) of the main unit.
    • The light colors and their states are as follows:
    Color Power State
    Green ON Paired
    Red (flashing) ON Not paired
    Yellow (flashing) ON Pairing
    Off OFF ---

About the LED next to the ContactSheet USB connector

If the LED is constantly lit red, it is due to product specifications. (This has minimal impact on the device's power consumption.)

  • If the Status Lamp (LED on the pairing button side) is off, the power is OFF.

# Notes

Note

When using Quest2/3 without the included strap, make sure to use the original strap when using ContactSheet.

Included Accessories (Third-party)

Item Appearance Description Quantity
AMVR Controller Knuckle Strap for Quest 2 ENABLE (Included when selecting Quest2) Meta Quest 2 Touch controller 1 set
AMVR Controller Knuckle Strap for Quest 3 ENABLE (Included when selecting Quest3) Strap for Meta Quest Touch Plus controller 1 set
DESTEK HAND GRIP PROTECTOR COVER ENABLE (Included when selecting QuestPro) Strap for Quest Touch Pro controller 1 set

← ContactSheet Installation Instructions →