Firmware Update

Update

1. Start DivingStation and follow the on-screen instructions to begin the update.

2. Insert the ContactGlove dongle into the PC according to the on-screen instructions.

3. Power on the ContactGlove and connect it to the PC following the on-screen instructions.

WARNING

Please ensure that the connection between the ContactGlove and the PC is wired.

If the update does not proceed after connecting, please check if the ContactGlove is powered on.

4. Once the Firmware update is complete, the ContactGlove will automatically restart.

5. The updated ContactGlove will be unpaired, so please re-pair it before use.

Manual Reinstallation

1. Start DivingStation and refer to the images below to begin the update.

2. The subsequent steps will follow the same procedure as steps 2 and onwards of the update above.