# Mount & Release
Magnetra utilizes a magnetic mount on the side of the index finger and a magnetic latch hinge to semi-fix the module to the Glove.
During use, Magnetra is mounted on the side of the index finger, and when the controller is in the way, the hinge can be rotated to move the module to the back of the hand.
# Mounting Procedure
While bending the index finger, use the other hand to grab Magnetra, rotate the hinge, and move the module towards the palm.
When rotated to the side of the index finger, Magnetra is secured by magnetic force, and the module is mounted.
# Release Procedure
Bend the index finger and use the thumb to press the side of Magnetra, releasing the mount on the side of the index finger.
Use the other hand to grab Magnetra, rotate the hinge, and move the module towards the back of the hand.
WARNING
When vigorously moving the Glove in the release state, there is a risk of the magnetic latch hinge of Magnetra coming off.
Always use Magnetra in the mounted state, placing the thumb on the Joystick or buttons.
# Adjusting Mount Position
The mounting position on the index finger side of Magnetra can be adjusted.
By changing the position of the magnets on the back of the Magnetra main body, adjustment can be made in three stages from the palm to the back of the hand.
If input is difficult, follow the steps below for adjustment.
- Remove the two screws of the magnet fixing parts on the back of the Magnetra main body.
TIP
During adjustment, be cautious about losing the fixing screws and magnets.
While paying attention to the polarity of the magnets, adjust the position of the magnets along the three-stage groove of the magnet fixing parts.
While ensuring the magnets do not move, screw the magnet fixing parts onto the back of the Magnetra main body.